← All brew guides

How to weigh and dose espresso

In coffee we talk about a recipe, much like baking a cake. It has four parts: coffee, water, time and water pressure. Change them one at a time, in a controlled way, and you can dial in your favourite shot and hit it again and again.

Starting point

Ratio
1:1.7 (grams in to grams out)
Time
25 to 30 seconds
Dose
7 g to 22 g, to suit your basket
Weighing espresso

You’ll need

  • Scales that read to 0.1 g
  • Timer or stopwatch

The brew ratio

A brew ratio compares ground coffee in with espresso out. For espresso it usually sits between 1:1 and 1:3. At 1:2, every gram of ground coffee gives 2 grams of espresso in the cup: 20 g in, 40 g out.

For this guide, all you need to measure is the coffee in the basket and the espresso in the cup.

Step by step

Step 1: Pick a ratio

We suggest starting at 1:1.7, with a 25 to 30 second shot. Work out how many grams you’re aiming for before you start.

Step 2: Tare

Put the group handle or a dosing cup on the scales and tare.

Step 3: Dose

Fill to your chosen weight. That could be anything from 7 g for a small single up to 22 g for a deep commercial basket.

Step 4: Tamp

Tamp the coffee and lock the handle into the machine.

Step 5: Set up the cup

Put the scales and your cup under the handle, and tare.

Step 6: Start

Start the shot and the timer together, and watch the pour. Our Espresso guide, step 7, shows what to look for.

Step 7: Stop

Watch the scales and stop the shot 2 to 3 grams short of your target, because the coffee still in the basket keeps dripping. Stop the timer at the same moment and check you landed between 25 and 30 seconds.

Step 8: Taste

It may take a few goes. A lower ratio gives more body and intensity. A higher ratio gives clearer flavours and a softer mouthfeel. Find the balance you like, and change only one thing at a time.

The pay-off is consistency. Weighing grams in and grams out takes two of the big variables out of the equation, so great shots get easier.